The H2-Flex is a self-contain hydrogen generator that converts water, under any condition, into very clean and pure hydrogen gas on demand. The 20-inch container is designed to sit in the back or trunk of vehicle, and provide hydrogen fuel to the normal fuel line. About 10 liters of hydrogen gas is stored in the filter system. This type of storage is considered the safest. Even gunshot tests on full hydrogen storage alloy do not result in any combustible reaction, which clearly demonstrates the safety level of the product. Unlike the high-pressure hydrogen cylinders, hydrogen is bonded with the alloy metal chemically. So it will take hours before the system fully release the gas in event of leakage caused by system’s damage.
The filter/storage system’s life cycle is incredibly long – you can expect it to pass a few thousand storage/release cycles without any essential changes in working technical characteristics. While the filter absolved hydrogen at 99,99% purity, the H2-Flex is capable of providing high purity hydrogen (over 99.9999%).
The H2-Flex produces pure hydrogen at the rate of 70 PSI, which is added to the normal fuel line and fuel mixture. This greatly improves overall combustion quality by allowing higher octane, a faster burn, and cleaner burn rate. This is very energy efficient because it saves energy by greatly reducing, or completely eliminating, the amount of gasoline the engine needs.
No electricity is required! H2-Flex MAKES PURE H2 at much higher rates than electrolysis with NO OXYGEN generated. That means NO O2 extenders, and no EFIE fuel injection system modifications to your car. It works on a simple and very inexpensive chemical reaction using aluminum and water!
This is the ideal situation for your car as there is no questioning if you have enough output or if you could benefit from additional ‘fine tuning’ such as adding O2 extenders to your oxygen sensors or adding an EFIE (Electronic Fuel Injection Enhancer). Chemical Mode allows you to immediately find out how much gains are possible in your specific vehicle with hydrogen.
Connecting the H2 flex to any vehicle is a relatively simple 3 steps, ten Minute’s process:
1) Place the H2-Flex in the trunk (or back) of a vehicle;
2) Join the hose to the fuel line, which is under the back seat of most vehicles.
3) Add water to the container–a simple and easy process.
User would then be able to go between 100 to 150 miles to the gallon of gas. This is considerably more MPG than most hybrid vehicle on the market!
INCLUDE IN THE H2 FLEX KIT
H2-Flex Hybrid Kit (value $685), See Installment Plan at this link: http://www.maynex.com/the-h2-flex-water-to-gas-hybrid-kit/
H2-Flex Hybrid Kit that will enable you to quickly and effortlessly transform your vehicle into one of the most powerful hybrid and flexible fuel ride on the road. All you have to do is just add liquid of any type (even your pee). We will also provide free shipping.
This kit includes everything you need in order to join the hybrid club.
Container type: Composite
H2-Flex Dimension: 20x11x13-inch
Control system: Automatic (plug-n-play)
Hydrogen Storage Capacity: 20± % Liters
Raw Hydrogen Purity: ≥ 99.99%
Hydrogen Charge Pressure: 0.1 – 0.5（10 – 25°C）MPa
Filter/Storage Environmental Temperature: 0 – 35 (we recommend ≤ 25°C) 0C
Hydrogen Discharge Pressure: > 0.1,≤ 0.5（25°C）MPa / 72PSI
Hydrogen Discharge Purity: ≥ 99.9999%
Hydrogen Discharge Flow Rate: ≤8 L/Min
Environmental Temperature: 10 – 60 0C
Valve Type: Quick connector
Total Weight: 40Lb.
Range: 100 ~ 150 mph/300 miles
Cover: Quick-clamp locking cover
Hose: 5 feet of clear, braided reinforced tubing
Accessories: 2 clamps & 1 Tee for quick connection to fuel line.